Big Red
05-06-2005, 01:39 PM
Located in Citrus Heights, CA (Sacramento metro)
<font size="4" s><font color="Red" c>$6,200 obo or trade for a 97' TJ or XJ or ZJ of equal or higher value. This way anyone wanting a comp ready Jeep doesn't have to spend all the $ on building up their stocker which would be alot more expensive.</font c></font s>
1985 Jeep CJ7-Clear title that was NV registered
1989 Chevy 350ci - Q-JET, Eldelbrock Intake
Newer waterpump, alternator and starter
New SM465 trans, new clutch, Novak Adapter
Dana 300 t-case, twin stick shifter
Ford 9" rear, 5.89s, full spool, 31 spline shafts with 2 spares
Dana 44 front, 5.89s, full spool, 30 spline shafts with 2 spares, I have a lock rite that I could sell you cheap if you wanted this.
CV rear driveline with spare, also have spare front driveline
5 newer 37x12.50x15 MTR's
15x8 18 bolt beadlocks on 4 tires/1 regular black 8" rim on the spare
M.O.R.E steering box bracket
Custome dash with all Autometer Phantom Gauges
6 point cage, rear is fully tubed out and dovetailed in the back
101" wheel base
Overall crawl ratio is about 110 to 1
Spring over lift, reverse shackle up front with custom 3" spring pack
Spring over rear with 3" custom XJ springs
Almost a zero departure angle in rear, and a great approach angle in front.
This Jeep was built 2 years ago and has wheeled with the best of them.
Has been threw the Rubicon many times including Little Sluice.
I'm selling because I live in a gated townhouse community and I don't have a tow rig to haul it around. DeadandCompany (Aaron) registered and street drove it in Nevada where it was registered.
http://www.pirate4x4.com/forum/attachment.php?attachmentid=186311
http://www.pirate4x4.com/forum/attachment.php?attachmentid=186312
http://www.pirate4x4.com/forum/attachment.php?attachmentid=186314
http://www.pirate4x4.com/forum/attachment.php?attachmentid=186320
http://www.pirate4x4.com/forum/attachment.php?attachmentid=186319
http://www.pirate4x4.com/forum/attachment.php?attachmentid=186318
http://www.pirate4x4.com/forum/attachment.php?attachmentid=186317
http://www.pirate4x4.com/forum/attachment.php?attachmentid=186321
<font color="Red" c><font size="2" s>Please note, I do have side plates to enclose the area behind the seat. The rear now enclosed at the very back with the round taillights enclosed. I don't have a welder, but do have the side plates that just need to be tack welded in. This would be a great storage area.</font s></font c>
PM me or e-mail me at: speedystein@email.com for more pics and info
I can also answer questions and set up appointments for viewing my CJ7 for sale at (916)396-8841.
thanks,
Troy
<font size="4" s><font color="Red" c>$6,200 obo or trade for a 97' TJ or XJ or ZJ of equal or higher value. This way anyone wanting a comp ready Jeep doesn't have to spend all the $ on building up their stocker which would be alot more expensive.</font c></font s>
1985 Jeep CJ7-Clear title that was NV registered
1989 Chevy 350ci - Q-JET, Eldelbrock Intake
Newer waterpump, alternator and starter
New SM465 trans, new clutch, Novak Adapter
Dana 300 t-case, twin stick shifter
Ford 9" rear, 5.89s, full spool, 31 spline shafts with 2 spares
Dana 44 front, 5.89s, full spool, 30 spline shafts with 2 spares, I have a lock rite that I could sell you cheap if you wanted this.
CV rear driveline with spare, also have spare front driveline
5 newer 37x12.50x15 MTR's
15x8 18 bolt beadlocks on 4 tires/1 regular black 8" rim on the spare
M.O.R.E steering box bracket
Custome dash with all Autometer Phantom Gauges
6 point cage, rear is fully tubed out and dovetailed in the back
101" wheel base
Overall crawl ratio is about 110 to 1
Spring over lift, reverse shackle up front with custom 3" spring pack
Spring over rear with 3" custom XJ springs
Almost a zero departure angle in rear, and a great approach angle in front.
This Jeep was built 2 years ago and has wheeled with the best of them.
Has been threw the Rubicon many times including Little Sluice.
I'm selling because I live in a gated townhouse community and I don't have a tow rig to haul it around. DeadandCompany (Aaron) registered and street drove it in Nevada where it was registered.
http://www.pirate4x4.com/forum/attachment.php?attachmentid=186311
http://www.pirate4x4.com/forum/attachment.php?attachmentid=186312
http://www.pirate4x4.com/forum/attachment.php?attachmentid=186314
http://www.pirate4x4.com/forum/attachment.php?attachmentid=186320
http://www.pirate4x4.com/forum/attachment.php?attachmentid=186319
http://www.pirate4x4.com/forum/attachment.php?attachmentid=186318
http://www.pirate4x4.com/forum/attachment.php?attachmentid=186317
http://www.pirate4x4.com/forum/attachment.php?attachmentid=186321
<font color="Red" c><font size="2" s>Please note, I do have side plates to enclose the area behind the seat. The rear now enclosed at the very back with the round taillights enclosed. I don't have a welder, but do have the side plates that just need to be tack welded in. This would be a great storage area.</font s></font c>
PM me or e-mail me at: speedystein@email.com for more pics and info
I can also answer questions and set up appointments for viewing my CJ7 for sale at (916)396-8841.
thanks,
Troy